The Two-Vehicle Lift System — Floor Jacks paired with Jack Stands.

Jack raises, stands lock. Never trust a jack alone.

Floor Jack lifts. Jack Stand Set locks the load while the jack lowers. The Two-Vehicle Lift System Kit bundles one jack with a matched stand pair — the safety-critical pairing rule for a driveway-side brake-rotor swap AND a workshop-bay structural-timber or marine hull cradle cycle.

Pre-SKU lineup — these slots are reserved while we tune the chassis, rated-tonnage stamps, and crank geometry. Sign up below to get notified when each SKU lands.

Browse the lineup Why pair

The Pairing Rule

A jack alone is never the final lift.

Jack raises the load AND the matched stand pair locks the rated tonnage while the jack lowers. The same pairing holds for a curb-side truck brake-rotor swap AND for a workshop-bay structural-timber or marine hull cradle cycle — the brand contract holds before launch, the same way it holds after.

Pair, never solo

Jack raises AND stand pair locks. Never trust a jack alone with a load at the curb OR a structural load on the workshop bay.

Tagged rated tonnage

Stamp tells the working technician when the curb lift OR the workshop cradle has reached working load — same stamp, same pair.

Slope + off-level

Wide steel wheels roll across a sloped driveway AND survive an off-level workshop floor without drifting under the rated load.

Dual-Use Taxonomy

Driveway AND workshop, paired the same way.

Every placeholder below honors the brand contract: an automotive clause AND a paired workshop / homeowner / marine clause. The lift raises a truck at the curb AND cradles a structural load on the bay. Storage lines up the same way — the same drawer covers both cycles.

Driveway

Vehicle lift on the curb

A passenger truck brake-rotor swap, pinch-weld clearance for a lowered sports car, OR a motorcycle service pickup — paired jack + stand cycle at rated tonnage on a sloped driveway.

· Jack reaches rated height in under ten strokes AND stand pair locks under the load.
· Wide steel wheels roll across concrete AND survive sloped-driveway drift under load.
· Pinch-weld groove seats a pinch weld without crushing trim AND accepts a stand saddle.

Workshop

Structural timber + marine cradle

Structurally rated beam lift on the workshop bay AND cradle duty for a marine hull on a trailer conversion — same tonnage stamp, same stand pair, same dual-use chassis.

· Cradles a hull cradle AND anchors a structural-timber beam at the same rated stamp.
· Welded stand column survives dropped-on-concrete workshop floor AND repeated cradle cycles.
· Tagged rated-tonnage stamp reads at the bay tag-end AND at the curb under a service truck.

Homeowner

Tractor front-end + weekend garage

A weekend tractor front-end service AND a first-time-homeowner garage-lift cycle — paired jack + stand, same Mechanic Core ladder, same dual-use chassis the driveway sees.

· Lifts a tractor front-end to bell-housing height AND stages a hull cradle on the trailer.
· Stand pair locks tractor rated tonnage AND locks structural-timber during a deck-frame lift.
· Pairs with the Digital Torque Wrench on wheel-bolt spec AND with the Modular Socket Set on cab fastener cycles.

The Lineup

Three reserved slots. Sign up to be notified at launch.

Each card is a placeholder SKU. The chassis, rated-tonnage stamps, and crank geometry are still being tuned — drop your email on the card that fits your lift cycle and we'll let you know when it's ready to ship.

Hero

Available soon

Floor Jack

Lifts a passenger truck at the driveway corner for a brake-rotor swap AND cradles a marine hull cradle or tractor front-end on the workshop bay from the same low-profile chassis.

Low-profile saddle lifts a rolled passenger truck at the driveway sweet-spot AND clears a lowered sports-car pinch weld without a second adapter on the workshop bay.
Hydraulic pump rate raises a one-ton truck to working height in under ten strokes AND stages a marine hull cradle or tractor front-end to bell-housing height from the same chassis.

Reserved slot · chassis and rated-tonnage stamps under final tuning. Sign up to be notified when this SKU ships.

Dual-use · HeroPre-launch signup

Premium

Available soon

Jack Stand Set (Rated-Tonnage Pair)

Locks a truck at curb-lifted height while a jack lowers AND anchors a structural-timber cradle or marine hull cradle on the workshop bay at the same rated tonnage from the matched pair.

Matched rated-tonnage pair locks under a truck pinch weld at curb-lifted height AND cradles a structural-timber or marine hull load on the workshop bay at the same tonnage stamp.
Welded steel column with ratchet bar holds a 3-ton truck load on a sloped driveway AND survives repeated drops on a concrete workshop floor between lift cycles.

Reserved slot · chassis and rated-tonnage stamps under final tuning. Sign up to be notified when this SKU ships.

Dual-use · PremiumPre-launch signup

Entry

Available soon

Two-Vehicle Lift System Kit (Jack + Matched Stand Pair)

Stages one truck at the curb for weekend brake duty AND stages a structural-timber or marine hull cradle on the workshop bay from the same low-profile jack paired with the rated-tonnage stand pair.

Low-profile floor jack plus matched rated-tonnage stand pair stages one truck for brake-rotor duty at the curb AND stages a structural-timber or marine hull cradle on the workshop bay without a second adapter set.
Wide steel wheels roll across a sloped driveway AND move a bell-housing-height cradle load across an off-level workshop floor between lift cycles.

Reserved slot · chassis and rated-tonnage stamps under final tuning. Sign up to be notified when this SKU ships.

Dual-use · EntryPre-launch signup

The Two-Vehicle Lift System — Floor Jacks paired with Jack Stands.

A jack alone is never the final lift.

Driveway AND workshop, paired the same way.

Three reserved slots. Sign up to be notified at launch.

Capture intent now. Ship at launch.